APPLICATION TIPS :

Stamping with polish:

In order to make a design from the selected stamping plate pattern, the nail surface must first be properly prepared:

Cover your color with a matte top coat or mattify the surface with a 280-grit buffer and clean thoroughly with a cotton swab soaked in Cleaner 1.

Gel style - after filing, it's best to cover the surface with a matte finish or matte the surface with a 280-grit pad and clean thoroughly with a cotton swab soaked in Cleaner 1.

The design chosen on the plate should then be covered with a sufficient layer of stamping varnish and the excess scraped off the plate with a fast, precise movement. Immediately afterwards, print the design on the plate with a pad and transfer it to the nail surface. Once the design has dried, we can apply the top coat of our choice.

PRO TIPS:

Don't wipe the pad or scraper with Cleaner 1 as this can damage their surface and impair the quality of the stamping.

It's best to clean the pad surface with tape, a pattern or a clothes roller. The surface can be gently cleaned with a Wipe Off cleaner as a last resort.

Stamper color: transparent

Scraper color: milky

Stamper dimensions: diameter 36 mm, height 29 mm

Scraper dimensions: 60x40mm